Easy2 Mob Ais/Dsc Water Activated - Bluetooth

Description

Man Overboard with both AIS and DSC systems

• Automatic activation upon full water contact
• Fully buoyant, suitable for almost all automatic life jackets
• Easy monitoring and programming via Bluetooth® and intuitive app

The new easy2-MOB is a combined AIS/ DSC emergency beacon and puts AIS MOB to the next level. The new AIS rescue transmitter now has an integrated DSC receiver and is able to send DSC „open loop distress calls“ and to receive their confirmation again. In the event of a “man overboard” situation, the device enables all ships in the immediate vicinity of the casualty to be alerted immediately. This ensures that rescue attempts can be made as quickly as possible. Alerting is carried out in parallel via AIS to all AIS receiving systems within transmission range of the easy2-MOB as well as via DSC “distress call“ to DSC radios. First and foremost, of course, with both alerts to your own ship. By using powerful red LEDs, the easy2-MOB can also be used as an electronic torch. This increases the visibility especially in the dark. Due to its small size, the AIS MOB easy2-MOB is suitable for use with numerous automatic life jackets.

HIGHLIGHTS

• Can be used with many automatic life jackets without any special preparation
• AIS emergency report to every AIS receiving system within the transmission range
• Repeating AIS emergency report with updated GPS position data
• DSC distress call to up to 8 different ships in the “closed loop“ process
• DSC distress call in the “open loop“ procedure automatically after 10 minutes
• 12+ hours of battery life
• Powerful red LED torch
• 1 watt radiated transmission power in AIS mode
• 0.5 watt radiated transmission power in DSC mode
• Fully automatic activation on contact with water
• Fully buoyant without a buoyancy aid
• No annual fees
• No licenses required
• In accordance with all standards and regulations
• Made in Germany

TECHNICAL DATA

• Approvals: CE
• Battery: 6V, 2 lithium units, CR2
• Operating temperature: -20 ° C to + 55 ° C
• Storage temperature: -40 ° C to + 70 ° C
• 2 buttons („TEST“ and „ON“)
• Display: 9 LEDs (1 x “program LED”, 2 x “status LED” and 6 x “flash light LED”) ; Red LED torch
• Dimensions (L/W/H): 195 x 50 x 32 mm (7.7 x 2 x 1.3 inches); Weight: 120 g (4.23 oz)

Frequencies:

• AIS: 161,975 and 162,025 MHz
• DSC: 156,525 MHz