Ruth Lee Drop Test Manikin, Gen 2, 220lbs (Adult)

Ruth Lee Drop Test Manikin Gen 2 - 220 lb Adult

The Ruth Lee Drop Test Manikin is a heavy-duty adult training manikin designed specifically for fall-arrest equipment testing, harness evaluation and working-at-height rescue training. At approximately 220 lb (100 kg), it provides a realistically weighted casualty for demanding tower, pole-top, industrial and rope-rescue scenarios.

Unlike a standard rescue manikin, the Drop Test model uses closed-cell foam through the torso to provide additional rigidity and reduce slumping when suspended in a rescue or fall-arrest harness.

Designed for Fall-Arrest & Harness Testing

The Drop Test Manikin allows organizations to evaluate rescue harnesses and fall-arrest equipment without placing a live volunteer at risk. Its realistic adult weight and anatomical weight distribution help reproduce the challenges of handling an unconscious casualty while suspended or working at height.

Ruth Lee specifically recommends this model for applications such as fall-arrest equipment testing, pole-top rescue and tower-rescue exercises.

Key Features

• Adult weight: Approximately 220 lb (100 kg)
• Adult height: Approximately 5 ft 11 in (1.8 m)
• Rigid torso design helps reduce slumping inside a harness
• Anatomically distributed weight simulates handling an unconscious casualty
• Strong rear polypropylene webbing loop assists with hauling and positioning
• Heavy-duty construction designed for repeated drop-testing applications
• Water-resistant polyester construction for wet or dry training environments
• Soft body joints help reduce pinch injuries during handling
• Protective coveralls and boots help protect the manikin from wear

Rigid Torso for Harness Training

One of the most important differences between the Drop Test Manikin and a standard Ruth Lee Duty manikin is the torso construction. Closed-cell foam provides increased rigidity so the body maintains its shape more effectively while suspended in a harness.

This allows trainers and equipment evaluators to more realistically assess harness positioning, casualty suspension and fall-arrest equipment performance.

Built for Repeated Drop Testing

Ruth Lee states that the Drop Test Manikin is strong enough for repeated training drops from approximately two or three stories without damaging the manikin when used as intended.

The outer construction is designed to withstand demanding rescue and equipment testing environments, while replaceable protective coveralls and boots help extend the service life of the underlying manikin.

Realistic 220 lb Casualty Handling

At approximately 220 lb, the Drop Test Manikin creates a substantial physical challenge for rescue teams. Its anatomically distributed weight provides a more realistic handling experience than using a rigid test weight or evenly weighted dummy.

This can help teams practice:

• Working-at-height rescue
• Tower and pole-top rescue
• Harness suspension and recovery
• Casualty hauling and lowering
• Fall-arrest equipment testing
• Team lifting and casualty handling

Rear Hauling Loop

A reinforced polypropylene webbing loop on the back allows the manikin to be hauled or positioned before an exercise. This is especially useful when placing the 220 lb manikin at height or preparing a suspended-casualty training scenario.

Wet & Dry Training Conditions

The polyester construction is water resistant and can be cleaned and dried after use in wet conditions. However, the Drop Test Manikin is not a dedicated water-rescue manikin and should not be used as a substitute for Ruth Lee's purpose-built aquatic rescue models.

Important Use Limitations

Ruth Lee does not recommend the Drop Test Manikin for:

• High-temperature or flash-over training above 100°C — use a Ruth Lee Fire House Manikin for those applications.
• Water-rescue training — use a purpose-built Ruth Lee Water Rescue Manikin.

Product Specifications

Frequently Asked Questions

What is the Ruth Lee Drop Test Manikin designed for?

It is designed primarily for fall-arrest equipment and harness testing, along with working-at-height, tower and pole-top rescue training.

Why is the torso more rigid than a standard rescue manikin?

The torso uses closed-cell foam to reduce slumping while the manikin is suspended in a harness. This helps create a more consistent body shape for harness and fall-arrest testing.

How much does the Drop Test Manikin weigh?

The adult model weighs approximately 220 lb (100 kg).

Can the manikin be dropped during training?

Yes. Ruth Lee specifically designed this model for drop-testing applications and states that it is strong enough to withstand drops from approximately two or three stories when used as intended.

Can the Drop Test Manikin be used for water rescue?

No. Although its polyester construction can be used and cleaned in wet conditions, Ruth Lee recommends a dedicated Water Rescue Manikin for aquatic rescue training.

Can it be used in fire-house or flash-over training?

Not for high-temperature scenarios above 100°C or flash-over training. Ruth Lee recommends its purpose-built Fire House Manikin for those environments.

Looking for additional Ruth Lee rescue and training models? Browse Ruth Lee Manikins & SandMANikins .